Wolo 340 Bull Horn Manuel d'utilisateur télécharger pdf

Installing the Bull Horn™

1. Install the Bull Horn™ in the engine compartment. Place in an area that is

dry and forward of the engine to minimize heat.

2. Place the horn on downward angle to prevent water from entering the

trumpet. Using the horn's mounting bracket as a template mark the two (2)

bracket holes. Drill the marked locations, be sure you clear hoses and wire

cable. Secure to vehicle using the bolts, washers and nuts provided.

WIRING

1. IMPORTANT - For best performance, connect red wire from the Bull Horn™

to a heavy duty switch. (Switch not included). See Fig. A.

2. Connect the other terminal of the switch to a positive (+) 12 volt source of

power - battery, alternator, fuse block, etc. Use at least 16 gauge wire. To

protect your horn purchase, if the 12 volt circuit being used for power is not

fused, install a 25 ampere fuse into this wire.

NOTE: If horn is mounted (secured) on plastic a ground wire is needed.

See Fig.

To ground

if horn is not

mounted

on metal.

amp. fuse

(not included)

+12

battery.

alternator,

etc.

Installing the Bull Horn™ 1

Résumé du contenu

Page 1 - Installing the Bull Horn™

Installing the Bull Horn™1. Install the Bull Horn™ in the engine compartment. Place in an area that isdry and forward of the engine to minimize heat.2

Commentaires sur ces manuels

Pas de commentaire

Wolo 340 Bull Horn Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Wolo 340 Bull Horn. Wolo 340 Bull Horn User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Wolo 340 Bull Horn