Wolo 3800M SERIES Wolo Beyond Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Wolo 3800M SERIES Wolo Beyond. Wolo 3800M SERIES Wolo Beyond User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Your choice of a Wolo warning light is the perfect choice to complement your vehicle. Wolo’s warning lights are
manufactured with the finest materials. Each light is tested to meet our high standards before it is packaged,
to assure a perfect working light. Our quality workmanship and components are Wolo’s assurance of a product
that will give years of dependable service. If you need help using your new Wolo warning light, our technicians
are available to answer your questions, Monday thru Friday, from 9 AM to 4 PM EST at 1-888-550-4676.
MAGNET MOUNTING:
MPORTANT: Vehicle roof construction varies for most vehicles as well as driving conditions. The vehicle should
never be driven with this warning light magnetically mounted. It is possible that the light could dislodge off the
mounting surface and cause damage, injury or death. Ignoring this warning shall be the sole responsibility of
the user and or vehicle owner.
IMPORTANT: The magnets’ holding power to the mounting surface is dependent upon the following:
flatness, thickness, condition and finish of the mounting surface. For maximum magnet strength, follow these
recommendations:
1. The vehicle’s mounting surface should be kept clean and free of wax, dirt, dust and foreign particles.
2. The bottom of the magnets’ rubber cover should be kept clean and free of wax, dirt, dust and foreign
particles.
3. Always make sure that the mounting surface is flat and that all four (4) magnets are fully secured.
4. Never attempt to secure the magnets to a vehicle that has a fabric or vinyl covering the mounting surface.
5. Once you have located the desired mounting location, you should make sure the lens is unobstructed so
that the light can be seen 360 degrees.
POWERING WARNING LIGHT: Fig. 1
6. To turn on the light bar, simply insert the light’s cigarette lighter plug into the vehicle’s power outlet. Press
the on/off button on the back on the cigarette lighter plug. When the light is operating the LED on the plug’s
rocker switch will illuminate
7. To turn off the warning light, remove the cigarette lighter plug from the vehicle’s power socket or position
the on/off switch to off.
IMPORTANT: The warning light’s cigarette lighter plug has a built-in fuse to protect the light and the vehicle. If
the warning light does not turn on when the plug is inserted into the vehicle power outlet, check the fuse by
the following method: The tip of the power plug has a chrome push-in contact which is secured by the plastic
nut. Unscrew the nut, and you will have access to the fuse. If the fuse needs to be replaced use a 5-amp fuse.
Follow the reverse procedure to re-assemble fuse back into power plug. See Fig. 1.
INSTALLATION INSTRUCTIONS FOR
BEYOND MODEL 3800M
LED WARNING LIGHT MAGNET MOUNT
Vue de la page 0
1 2

Résumé du contenu

Page 1 - BEYOND MODEL 3800M

Your choice of a Wolo warning light is the perfect choice to complement your vehicle. Wolo’s warning lights are manufactured with the finest materials.

Page 2

CHANGING LIGHT PATTERN:There are twelve (12) different light patterns to choose from. Press the pattern selector switch button on the back of the cig

Commentaires sur ces manuels

Pas de commentaire