Wolo 846 The Chief Manuel d'utilisateur télécharger pdf

METHOD A. (Fig. C.) Is the recommended method for a roof mount installation using the flexible inlet hose

(provided), connecting to the horn’s air inlet located at bottom

base plate.

METHOD B.

(Fig. D) Using the air inlet located at the front

base. IMPORTANT: For method B you will need to install the

screw plug into the horn’s air inlet located at the bottom base

plate before the horn is secured to the vehicle.

1. Locate the desired area you wish to mount THE CHIEF air

horn. For best results, the front of the horn should be

unobstructed so that the horn’s sound can project straight

ahead. Use the horn’s gasket as a template, mark hole

locations and drill to size. See Fig. A.

IMPORTANT: For method B mounting: only drill the two-(2)

1/4” screw holes, (the 7/16’’ hole is not required).

2. Secure the horns to the vehicle using the hardware provided.

Tighten screws evenly to prevent damage to the horn. See Fig. A.

IMPORTANT: Be sure to use the rubber gasket to protect

against water leaks.

3. Position the front trumpet support bracket around the narrow

part of the trumpet. Push the bracket forward until it is tight.

Use the bracket as a template, mark hole locations and drill

to size. See Fig. B.

4. Secure the front trumpet to the vehicle using the hardware

provided. Tighten screws evenly to prevent damage to the

horn. See Fig. B.

IMPORTANT: Be sure to use the rubber gasket to protect

against water leaks.

INSTALLATION INSTRUCTIONS

For THE CHIEF - Model 846

Your choice of Wolo’s THE CHIEF Air Horn is the perfect choice to compliment any emergency vehicle

providing an extra level of powerful warning sound to clear the right-of-way. The Wolo name, is your

guarantee of a superior horn made with the finest material and precision workmanship to assure years of

dependable service. Our technicians are available to answer your questions, Monday through Friday from 8

AM to 4 PM EST at 1-888-550-HORN (4676).

AIR HORN INSTALLATION

Before installing THE CHIEF you will need to determine which of the two air inlets is the most suitable for your

installation. See below Method A or Method B.

Fig A

Rubber Gasket

NOTE: Center Hole Not

Used In Method B

1/4’’

6 mm

1/4’’

6 mm

Fig B

Rubber Gasket

Push

Forward

1/4’’

6 mm

1 2

Résumé du contenu

Page 1 - For THE CHIEF - Model 846

METHOD A. (Fig. C.) Is the recommended method for a roof mount installation using the flexible inlet hose(provided), connecting to the horn’s air inle

Page 2 - CONNECTING TO AIR INLET

CONNECTING TO AIR INLETMETHOD A – See Fig. C5. Secure the flexible air hose provided, into the horn’s bottombase plate air inlet. Do not remove the T

Commentaires sur ces manuels

Pas de commentaire

Wolo 846 The Chief Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Wolo 846 The Chief. Wolo 846 The Chief User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Wolo 846 The Chief